2 Black Lock Covers (For V2 Back Panel)
- 2 Blank (Not Customizable) Lock Covers for your back panel.
- 2 Magnet Mounts
- Color: Black
Should fit most V2 campers.
Customers with the following vehicles/camper have reported NO problems with fitment:
XL V2 for: RAM 2500 with (6.5′ Bed), 2022 Ram 1500 TRX (5.5′ bed) 2021 Toyota Tundra (5.5′ bed), 2016 Toyota Tundra (5.5′ bed)
Standard V2 for: 2021 Toyota Tacoma (6′ bed), 4th Gen Ford Ranger, 2020 Jeep Gladiator (5′ bed), Chevrolet Colorado (5′ bed)
(List will be updated as more vehicle and camper combinations are confirmed)
3D printed cover for the locks on the GFC V2. Moisture present in the latch can freeze. Lock covers can help limit additional moisture from entering and potentially freezing the latch.
- 3D printed using Polyethylene Terephthalate Glycol (PETG)
- Color: Black
- Uses multiple strong magnets built into the cover and magnet mount.
- Uses a synthetic rubber weatherstrip seal
- No Cutting Necessary – You’ll just need a screwdriver
- Dimensions: 5.5″ x 3.25″ x .625″
- Regular Lock Covers are not customizable
Caution: Lock covers are still being tested for use while vehicle is in motion. We cannot predict how lock covers will perform with all drivers, vehicles, and road conditions. To prevent loss or damage, we recommend removing lock covers while your vehicle is in motion.
How they work:
When mounted to your camper, each lock cover utilizes 12 Neodymium magnets (6 in the cover and 6 in the magnetic mount). Each magnet has almost a 17lb pull strength allowing the covers to be pulled tightly. All magnets are encased inside the plastic for maximum durability. The magnets pull the cover tightly over the lock while a weather strip helps prevent water intrusion.
ATTENTION! – These are strong magnets so we are including the warning from the magnet supplier for your review.
WARNING: NdFeB magnets are very powerful and can be dangerous if not handled with the proper care. Do not bring within 12 inches of any magnetic based storage devices such as desktop or laptop computers, hard drives, floppy disks, cassette tapes, VHS tapes, ore credit cards. Keep away from computer monitors, VCR’s and TV’s. If you or someone in your household has a PACEMAKER, please consult your doctor about possible risks before purchasing magnets or products with magnets. Do not let these magnets snap together with their full force or they will break and quite possibly send small pieces of metal flying in all directions. Do not attempt to machine or drill the magnets. High temperatures during these processes could cause the magnet powder to ignite. Neodymium magnets can pinch very hard. For your own safety do not allow fingers or any part of your body to come in between the magnets. Do not ingest or inhale magnets. Attraction of magnets in the body may cause serious injury and require immediate medical care.
Lock Cover Installation & Care:
What to expect:
Quality & Tolerances: 3D printing isn’t perfect. Many 3D printed items require some type of post-processing to look good. Most 3D printed items we will offer will receive very little post-processing (mostly light sanding or trimming). Sometimes 3D printed items have minor imperfections during the 3D printing process. This is why there is a tolerance for some blemishing. With that said, we inspect every item while printing and before it ships. If we feel the quality of the item is unacceptable or won’t perform well, we will have a new item made.
Delivery Time: We 3D print at a standard quality. Some items in your order may take half of a day to complete. We are just starting out so some orders may take longer if they start stacking up. If necessary, we will adjust for increased demand and add more production capability as we go. We will not sacrifice the quality to meet demand. We know it’s not fun waiting after you pay, and I do appreciate your patience.